XK (X150) V8-4.2L SC (2007)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Front Shock Absorber
Front Shock Absorber
Special Service Tools
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the LH front wheel and tire.
3. NOTE: Use an additional wrench to prevent the ball joint rotating.
Disconnect the LH stabilizer bar link.
> Remove and discard the 2 nuts.
4. Disconnect the height sensor link.
5. CAUTION: Use an Allen key to prevent the ball joint rotating whilst removing the nut.
Release the upper suspension arm ball joint.
> Remove and discard the nut.