XK (X150) V8-4.2L SC (2007)
Shifter A/T: Service and Repair
Selector Lever
Selector Lever
Removal
1. Remove the rear seat armrest.
2. Remove the floor console veneer trim panel.
3. Remove the floor console rear panel.
^
Carefully release the 2 clips.
4. Remove the floor console side panel trim.
^
Remove the 2 Torx bolts.
^
Carefully release 11 clips.
^
Repeat the procedure and remove the opposite hand.
5. Release the LH side floor console electrical harness connector blocks.
^
Carefully release the 4 clips.
6. Disconnect the gear selector assembly electrical connector.