XK (X150) V8-4.2L SC (2007)
Wiper Pivot: Service and Repair
Wiper Pivot Arm (84.15.03)
Removal
CAUTION: Always protect paintwork and glass when removing exterior components.
1. Open the hood.
2. Remove the windshield wiper arms.
-
Remove the 2 access plugs.
-
Remove the 2 nuts.
-
Disconnect the 2 washer jet hoses.
3. Remove the wiper blades.
-
Release the 2 clips.
4. Remove the 2 washer jets.
-
Carefully release the 4 clips.
-
Disconnect the washer jet hoses..
NOTE: RH illustration shown, LH is similar
Installation
1. Install the washer jets.
-
Connect the hoses.
-
Carefully secure the clips.
2. Install the wiper blades.
-
Position and secure the clips.
3. Install the windshield wiper arms.
-
Tighten the nuts to 17 Nm (13 lb.ft).
-
Install the covers.
-
Connect the washer jet hoses.
NOTE: Align the wipers between the marks on the windscreen.