jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Body - Front Window Regulator Reset|Page 2484 > < Towing Information|Service and Repair|Page 2475
Page 1
background image

Front Door Window Regulator: Technical Service Bulletins
Body - Front Window Regulator Reset

No: JTB00205
Issue: 1
Date: 22 JULY 2010

SECTION: 501

Front Window Regulator Reset

AFFECTED VEHICLE RANGE:

CONDITION SUMMARY:

Situation:
The door window glass may experience one or more of the following:

--> Glass drops when closing

--> A knock! clunk! squeak! ticking noise when the glass is moving (opening or closing)

--> Glass binds when moving (opening or closing)

NOTE:

It is not necessary to remove or replace the window regulator or motor to resolve these issues.

These issues may be caused by an incorrect setting of the inboard / outboard (lateral) of the door glass.

Action: 
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to reset the door window regulator(s).

PARTS:

No parts necessary

TOOLS:

Refer to GTR for required special tools

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

Normal warranty policies and procedures apply.

REPAIR PROCEDURE

FRONT WINDOW GLASS RESET

NOTE:

Global Technical Reference (GTR) lookup sequence is as follows:

GTR Home > NAS > X150-XK > Service Information > Model Year > Workshop Manual

Body - Front Window Regulator Reset|Page 2484 > < Towing Information|Service and Repair|Page 2475