XK (X150) V8-5.0L SC (2010)
/v8-5.0l_sc/Page-536003.png)
1. Install is the reversal of removal.
2. Tighten the crossmember to fender apron panel front extension bolts to: 20 Nm (15 lb.ft).
3. Tighten the crossmember to fender apron panel reinforcement bolts to: 30 Nm (22 lb.ft).
4. Tighten the crossmember to front side member extension bolts to: 25 Nm (18 lb.ft).
