XK (X150) V8-5.0L SC (2010)
Removal
All vehicles
1. Disconnect the battery ground cable. For additional information, refer to Specifications
2.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
Vehicles with 4.2L engine
3. Remove the rear subframe assembly. For additional information, refer to Rear Subframe - 4.2L
Vehicles with 5.0L engine
4. Remove the rear subframe assembly. For additional information, refer to Rear Subframe - 5.0L
All vehicles
5.
NOTE:
Note the fitted position.
Using the special tools, remove and discard the rear subframe rear bushing.
Installation
All vehicles
1.
NOTE:
Align to the position noted on removal.
Using the special tools, Install the new rear bushings.
Vehicles with 4.2L engine