XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Front Subframe Mount: Service and Repair
Front Axle Crossmember Front Bushing
Front Axle Crossmember Front Bushing (60.35.24)
Special Service Tools
Removal
1. CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These
devices restrict the number of times a nut or bolt can be used.
Remove crossbeam.
2. Using a hydraulic press, remove front mounting bush from the crossbeam.
1. Place special tool on the press-bed, with the tool cut-outs upper most.
2. Position crossbeam on press-bed, with special tool aligned underneath bush.
3. Align special tool on top of bush.
-
Operate press to remove bush from crossbeam.