XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
2. Fit bolts securing link assemblies to suspension subframe.
-
Make sure spacer is in position.
-
Fit bolt, DO NOT tighten at this stage.
-
Repeat procedure to fit bolt to opposite-side of subframe.
3. Fit bolts shown, to suspension subframe.
-
Fit bolts, DO NOT tighten at this stage.
-
Fit nuts and bolts, DO NOT tighten at this stage.
-
Fit nuts and bolts, DO NOT tighten at this stage.
4. Tighten subframe bolts shown.