XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
Console: Service and Repair
Floor Console Finish Panel
Floor Console Finish Panel (76.47.26)
Removal
1. Apply handbrake and turn ignition key to II.
2. Depress brake pedal, move gear selector to position N and turn ignition key to O.
3. Remove battery cover and disconnect ground cable from battery terminal.
4. Remove gear selector surround finisher.
5. Remove Sport mode and Cruise Control switches from surround finisher.
6. Slacken and remove the four screws securing the two console veneer panel clamp plates and remove the clamp plates.
7. Withdraw veneer panel, passing switches through the aperture. On the convertible model, disconnect the roof operating switch harness multiplug.
8. Remove oddments tray and remove veneer panel from console.