XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
14. Avoiding damage to fascia, door aperture seals and door casings, lift and turn headlining through 90 degrees, tilt into passenger footwell and
remove from vehicle.
15. Remove interior light from headlining.
Installation
1. Fit interior light to headlining.
2. Place headlining in vehicle tilted to position with one end in footwell and opposite end at top of door aperture.
3. Lift and rotate headlining through 90 degrees.
4. Position headlining at roof and reposition door aperture seals to retain it.
5. Connect interior light multiplug.
6. Fully seat headlining ensuring correct positioning over backlight flange.
7. Bend body tabs into position to secure headlining.
8. Fit roof console. See: Console/Service and Repair
9. Fit both sun visors. See: Sun Visor/Service and Repair
10. Fit 'A' post upper trim panels. See: Trim Panel/Service and Repair
11. Fit center console assembly. See: Console/Service and Repair
12. Fit 'J' gate surround. See: Console/Service and Repair
13. Fit combined grab handles and coat hanger hooks.
14. Fit rear quarter casings. See: Trim Panel/Service and Repair
15. Fit rear seat squab and cushion. See: Seats/Seat Cushion/Service and Repair
16. Connect earth cable to battery terminal and fit battery cover. Refer to 'Battery, Service and Repair, Battery Reconnection Procedure.' See: Starting
and Charging/Battery/Service and Repair
17. Fit front seats. See: Seats/Service and Repair