XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-701003.png)
NOTE: To minimize brake fluid loss, release the brake tubes in the order shown.
9. Release brake tubes.
-
Undo union nuts and release inlet brake tubes.
-
Install plugs to inlet ports and brake tubes.
-
Undo union nuts and release outlet brake tubes.
-
Install plugs to outlet ports and brake tubes.
10. Remove brake control module from bracket. Remove bolts.
11. Clean components and mating surfaces.
Installation
NOTE: The replacement brake control modulator is pre-filled with brake fluid.
