XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
9. Remove brake pads from caliper.
-
Withdraw pins from caliper.
-
Remove anti-rattle spring.
-
Remove brake pads.
CAUTION: Only remove the bolts securing the caliper anchor bracket to the hub carrier. Refer to caution above for more information.
10. Remove caliper from hub carrier.
-
Remove bolts.
11. Remove brake dust and clean mating surfaces. See Warning above.
Installation
1. Install caliper to hub carrier.
-
Install and tighten bolts to 60 Nm.
CAUTION: Retracting the caliper piston may cause the fluid reservoir to over-flow. Remove brake fluid spillage immediately from paint work with
clean water.