XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
4. Loosen brake fluid reservoir-cap.
-
Position a cloth around the reservoir to collect any fluid spillage.
CAUTION: Always install new brake pads, irrespective of the condition of the original pads, when renewing brake discs.
5. Remove brake pads from caliper.
-
Remove 'R' clips.
-
Withdraw pins from caliper.
-
Remove anti-rattle spring.
-
Discard brake pads.
CAUTION: Only remove the bolts securing the caliper anchor bracket to the vertical link. Refer to caution above for more information.
CAUTION: Do not allow the caliper to hang on the hydraulic hose, as this will damage the hose.
6. Remove caliper from vertical link.
-
Remove bolts.
-
Remove caliper and tie aside.