XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-261004.png)
22. Carefully move the connecting rod and piston assembly towards the the crankshaft and connect it to the crankpin. Rotate the crankshaft slightly if
necessary.
23. If necessary, for details of piston and connecting rod orientation refer to Application and ID.
24. Install and align the new bearing shell to the connecting rod cap.
25. Apply new engine oil to the bearing shell.
26. Install the cap and NEW bolts to the connecting rod.
Note the position of the identification marks and install the cap so that the identification marks are adjacent to those on the connecting rod.
Install the new bolts which secure the bearing cap.
