XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
22. Tighten the three screws which secure the water pump pulley, to 10-14 Nm.
23. Connect the top hose to the coolant outlet pipe.
Connect the top hose. Reposition the hose clip and tighten.
24. Connect the radiator top hose.
Connect the hose to the radiator.
Reposition the clip along the hose and tighten the clip.
25. Reset the engine compartment cover to the normal position and connect the gas struts.
26. Connect the battery and install the battery cover.
Reset the side glass memory.
27. Refill the cooling system.
28. Remove the paintwork protection sheets and close the engine compartment.