XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-327012.png)
Installation
1. Install the secondary timing chain.
Fit the assembly to the camshafts with the chain correctly positioned over the tensioner; variable camshaft timing oil control unit (or intake
camshaft sprocket - vehicles fitted with supercharger) to the inlet and the sprocket to the exhaust.
Fit, but do not tighten, each bolt which secures the variable camshaft timing oil control unit (or intake camshaft sprocket - vehicles fitted with
supercharger) and the exhaust sprocket to the camshafts. Allow the variable camshaft timing oil control unit sufficient space to fit the primary
chain, in a later operation.
2. Install the right-hand primary chain. For additional information, refer to Primary Timing Chain RH (12.65.66) (Section )
