XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
1. Fit new seals to the engine front cover.
Install the new seal to the inner groove on the face of the timing cover.
Install the new seal to the outer groove on the face of the timing cover.
2. Apply sealant to the eight joints on the engine face.
Sealant beads to be 3mm diameter and 12mm long. Cut the nozzle of the sealant tube to produce a 3mm bead. (Fit and tighten the securing bolts
within twenty minutes of sealant application)
3. Install the engine front cover.
Complete the tightening sequence.
Tighten to 11 - 13 Nm.
Vehicles with supercharger