jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Jaguar XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)|Capacity Specifications|Page 704 > < Jaguar XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)|Capacity Specifications|Page 702
Page 2
background image

6. Refit the radiator drain plug.

Clean any coolant from the underside of the vehicle. Remove the drain tray.

7. Lower the vehicle.

Refill 

1. Refill the cooling system with a 50% solution of water and Jaguar Antifreeze/Corrosion Inhibitor ESD - M97B49-A.

Remove the threaded plug and Dowty washer from the charge air cooler fill point.
Fill the cooling system at the header tank until the level stabilizes near the top of the charge air cooler fill point. This will take some time, as air is
being purged from the system.
Ensure that the header tank is full.

2. NOTE:  To ensure that air is not drawn into the system during the following operations:

Do not remove the cap from the header tank whilst the charge air cooling system is open to atmosphere.
Do not switch on the ignition when the charge air cooling system is open to atmosphere because the electrical cooling pump may draw air into the
system.

Fit the pressure cap to the header tank.

Jaguar XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)|Capacity Specifications|Page 704 > < Jaguar XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)|Capacity Specifications|Page 702