XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
Power Steering Fluid: Service and Repair
System Filling and Bleeding (Vacuum Fill)
System Filling and Bleeding (Vacuum Fill)
Fluid Hoses
1. Parts List
1
Return Hose
2
High Pressure Hose
2. If vacuum filling equipment is available, proceed as follows:
-
Disconnect both the high pressure hose (2) and return hose (1) from the PAS pump and the return hose from the steering rack.
-
Drain as much fluid as possible from the system by turning the steering from lock to lock two or three times.
-
Reconnect all hoses.
-
Fill the system using the vacuum equipment according to the manufacturers instructions.
-
Start the engine and top up the fluid as necessary.
-
Turn the steering from lock to lock two or three times with the engine running, topping up with fluid as necessary.
-
If possible, run the engine for twenty minutes to expel any remaining air.