XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
9.
Displace and reposition canister close valve and carbon canister from body studs for access.
10.
Disconnect canister close valve from carbon canister hose.
11.
Remove canister close valve/vapor pipe assembly from vehicle.
All vehicles
12.
Release and reposition vapor pipe hose to canister close valve securing clip.
Note:
Illustration 9 shows the canister close valve removed from the vehicle. When carrying out this step on coupe vehicles the canister close valve
will still be installed in the vehicle.
13.
Remove the vapor pipe hose from the canister close valve and place aside.
Note:
Illustration 10 shows the canister close valve removed from the vehicle. When carrying out this step on coupe vehicles the canister close valve
will still be installed in the vehicle.
14.
Remove securing clip from vapor pipe hose.
15.
Place vapor pipe hose assembly aside.
16.
Place new vapor pipe hose assembly to front.
17.
Install securing clip to vapor pipe hose.
18.
Install the vapor pipe hose to the canister close valve.
19.
Reposition vapor pipe hose to canister close valve-securing clip.
Convertible vehicles only
20.
Install canister close valve vapor pipe assembly to vehicle.