XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-910002.png)
6. CAUTION: Do not allow the weight of the vertical link to hang on the brake hose.
Release upper ball-joint from vertical link.
Using a strong length of wire secure the vertical link to the shock absorber.
Fit special tool to ball joint.
Tighten tool bolt to release ball joint pin-taper.
Remove tool and disengage ball joint from vertical link.
7. CAUTION: For installation reference, note the position of washers and shims before removing fulcrum bolt.
Remove upper wishbone.
