XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
-
Install inner bearing in hub carrier.
CAUTION: Do not allow press load to be directed on to hub studs.
9. Using a hydraulic press, install ABS-sensor rotor to hub.
-
Place block of wood on press-bed.
-
Position hub carrier on block of wood.
-
Position ABS-rotor sensor to hub.
-
Align assembly to press-ram, and operate press to install ABS-sensor rotor to hub.
CAUTION: Do not use excessive force when levering hub.
10. Measure hub end-float. Secure hub carrier in vice.
-
Install special tool JD15 to hub.
-
Install dial gauge JD 13A on hub carrier.
-
Using two levers, measure and record hub end-float.
-
Remove special tools from hub carrier.