XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
Seals and Gaskets: Service and Repair
Transmission Pan Gasket
FLUID PAN GASKET
Removal
NOTE: This procedure will not remove residual fluid from the torque converter.
1. Disconnect the battery ground lead.
2. Raise the vehicle for access.
3. Drain the transmission fluid.
WARNING: TRANSMISSION FLUID MAY CAUSE SEVERE BURNS, ENSURE THAT ALL SAFETY PROCEDURES ARE
OBSERVED AND THAT THE RECEPTACLE FOR WASTE HAS SUFFICIENT CAPACITY.
Carefully remove the drain plug and discard the sealing washer.
4. Remove the fluid pan.
NOTE: The harness heatshield upper edge is retained by a clip.
Remove the six bolts and clamps which secure the fluid pan to the transmission.
Installation