XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-657015.png)
-
Install inner bearing.
18. Determine hub end float.
-
Measure and record end-float as a datum.
-
Calculating from datum, select a shim that will achieve a 0.076 mm end-float.
19. Install new bearing shim.
-
Install selected shim.
-
Install inner bearing.
-
Using special tool 205-234, install inner bearing seal.
20. Place block of wood on hydraulic press-bed and position hub carrier on block.
CAUTION: Do not allow press load to be directed on to hub studs.
21. Align ABS rotor to hub and operate press to fully seat rotor on hub.
