XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
Pull the switch stalk towards the steering wheel for a single slow speed wipe.
With the switch held in this position, the wiper will operate continuously at slow speed until released.
Programmed Wash/Wipe
To obtain the wash/wipe program:
Press the button on the end of the switch stalk.
A short press will briefly operate the washers and the wipers will complete three wipes.
If the button is held depressed, the washers and wipers will operate continuously for up to twenty seconds.
When released, the washers will stop and the wipers complete a further three wipes. The drip wipe function will perform a single wiper sweep four
seconds after the wipe/wash sequence has finished.
If the 'Washer fluid low' message is displayed and the wash/wipe is selected, the wipers will operate but not the washers.