Cherokee 2WD L4-126 2.1L DSL Turbo VIN B FI (1986)
12.
If dial indicator reading obtained is not as specified, proceed as follows:
a. Loosen pump adjustment bolts.
b. Check dial indicator reading.
c. To increase piston lift, rotate pump toward engine and then away from engine.
d. To decrease piston lift, rotate pump away from engine. Always adjust piston lift by rotating pump away from engine. This is the normal
direction of pump rotation. When increasing the piston lift, rotate pump toward the engine until piston lift is greater than the
specified tolerance and then rotate pump away from engine until the correct piston lift is indicated on the dial indicator.
13.
After adjustment is completed, tighten adjustment bolts and remove TDC rod from the crankshaft counterweight.
