Cherokee 2WD L4-126 2.1L DSL Turbo VIN B FI (1986)
Transmission Governor (Exploded View)
1. Remove the large snap ring (2) from the weight end of the governor body.
2. Remove the weight assembly.
3. Remove the small snap ring (3) from the governor weight assembly.
4. Separate the inner weight (4) spring (5) and outer weight (6).
5. Identify the spring with the tag.
6. If the park gear or the governor body is to be replaced, straighten the lock tabs and remove the bolts attaching the body gear.
7. Remove the governor filter screen (7).
GOVERNOR BODY CLEANING AND INSPECTION
1. Thoroughly clean all governor parts in a suitable cleaning solution but do not use any type of caustic cleaning solution.
The weights and valves should fall freely in their bores when clean and dry. Rough surfaces and burrs may be polished using crocus cloth.
2. Inspect the governor weight spring for distortion. Replace the spring, if damaged.
