jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Inner Axle Seal - Applications|Page 1294 > < Axle Shaft Replacement|Page 1289
Page 1
background image

Seals and Gaskets: Technical Service Bulletins
Inner Axle Seal - Applications

MAY 1986
001 022
1984-86 CHEROKEE/WAGONEER MODELS
18E
REAR AXLE

Attention: Workshop, Parts Department

REAR AXLE SHAFT AND INNER SEAL APPLICATION

Two different rear axle assemblies are used in Cherokee/Wagoneer models. The AMC/JEEP rear axle is used in 1984, 1985 and early production 1986
models. Later production 1986 models are equipped with the Dana Model 35 rear axle.

Fig. 1 - Axle Shaft and InnerSeal

Axle Shaft and Inner Seal Interchangeability

The Dana axle shaft can be used in AMC/JEEP axles but only if the Dana bearing, bearing retainer and outer seal are used. In addition, a special inner
seal, PN 8983 503 319, must also be used (Fig. 1). This seal has the proper outside diameter for use in the AMC/JEEP axle tube and the proper inside
diameter for use with the Dana axle shaft.

Fig. 2 - Axle Identification

Inner Axle Seal - Applications|Page 1294 > < Axle Shaft Replacement|Page 1289