Cherokee 2WD L4-150 2.5L VIN E TBI (1989)
Keyless Entry Receiver: Service and Repair
W/O Overhead Console
(1) Remove the screws attaching the receiver bezel to the headlining.
(2) Remove the receiver from the bezel by depressing the retaining clips on the back of the receiver and pushing the receiver out of the bezel. Remove
the receiver lens.
(3) Disconnect the receiver harness connector.
(4) Inspect the receiver housing for the code number (key) for the correct replacement transmitter.
(5) Reverse the removal procedures to install the receiver.
