Cherokee 2WD L4-150 2.5L VIN H TBI (1988)
Mirrors: All Technical Service Bulletins
Outside Remote Mirror - Will Not Adjust
Models
1984-90 XJ Bodies
1986-90 MJ Bodies
Subject
Outside Remote Mirror Will Not Adjust Inward/ Outward
Index
BODY & SHEET METAL
Date
June 26, 1990
No.
23-50-90
P-1993 (C23-11-0)
BODY CODE LEGEND
XJ - CHEROKEE/WAGONEER MJ - COMANCHE
SYMPTOM/CONDITION
On some Cherokee, Wagoneer and Comanche models equipped with manually operated outside remote mirrors, the setscrew in the bottom of the mirror
trim cover may become, "stripped out". This condition will limit the mirror adjustment inward and outward but not up and down.
DIAGNOSIS
Check the setscrew in the bottom of the mirror trim cover for tightness. If it cannot be tightened, the setscrew can be replaced with the new style setscrew
listed below.
PARTS REQUIRED
1
Setscrew
PN 34201692
(2 per pkg.)
REPAIR PROCEDURE
Figure 1
1.
Using an appropriate tool, remove the existing setscrew from the bottom of the mirror trim cover as shown in the illustration on page 2.
NOTE:
THE MIRROR TRIM COVER DOES NOT HAVE TO BE REMOVED FROM THE DOOR TO REMOVE THE SETSCREW.
2.
Install the new setscrew using a # 7 Torx bit and tighten it to 7.5 in.lbs. (10 N-m) torque.
3.
Check the mirror adjustment to insure proper operation in all four directions.
