Cherokee 2WD L4-150 2.5L VIN H TBI (1988)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement
Front
FRONT WHEEL SENSOR REMOVAL
1. Raise vehicle and turn wheel outward for easier access to sensor.
Fig.15 Front Sensor Wire Routing
2. Note sensor wire routing for installation reference.
3. Cut tie straps securing sensor wire to steering knuckle and front brake hose and line.
4. If sensor is covered with heavy accumulations of dirt, mud, or road splash, clean the sensor and surrounding area before proceeding. This is
necessary to avoid possible damage when removing the sensor.
Fig.16 Front Sensor And Tone Wheel
5. Remove sensor attaching screw and remove sensor from steering knuckle.
6. Unseat grommet retaining sensor wire in wheel house panel.
7. In engine compartment, disconnect sensor wire connector at anti-lock harness plug. Then remove sensor and wire.
FRONT WHEEL SENSOR INSTALLATION
