Cherokee 2WD L4-150 2.5L VIN H TBI (1988)
Evaporator Housing Removal
7. Cut the plastic retaining strap that retains the evaporator/blower housing to the heater core housing.
8. Disconnect and remove the heater control cable.
9. Remove the clip at the rear of the blower housing flange and remove the retaining screws.
Evaporator Housing Mounting
10. Remove the housing attaching nuts from the studs on the engine compartment side of the dash panel. Remove the evaporator drain tube.
11. Remove the right kick panel and then remove the instrument panel support bolt.
12. Gently pull out on the right side of the dash and rotate the housing downward and toward the rear of the vehicle to disengage the housing studs
from the dash panel. Then remove the evaporator blower housing.
INSTALLATION
