Cherokee 2WD L4-150 2.5L VIN H TBI (1988)
Ignition Switch Lock Cylinder: Service and Repair
Without Tilt
REMOVAL
NOTE: Steering column removal from the vehicle is not necessary for Ignition key/lock cylinder service.
1. Remove the steering wheel.
2. Remove the lockplate cover.
WARNING: THE LOCKPLATE RETAINS A VERY STRONG, SPRING FORCE. DO NOT ATTEMPT TO REMOVE THE
STEERING SHAFT RETAINING SNAP RING WITHOUT USING LOCKPLATE COMPRESSOR C-41 56 (J23653-B).
Retaining Snap Ring Removal
3. Compress the lockplate with Compressor C-4156 (J-23653-B) and release the steering shaft retaining snap ring.
4. Remove the lockplate compressor tool and the retaining snap ring. Discard the snap ring.
CAUTION: When the steering shaft retaining snap ring is removed, the steering shaft is no longer retained within the column.
Steering Column Disassembly
