Cherokee 2WD L4-150 2.5L VIN H TBI (1988)
Steering Wheel: Service and Repair
Fig. 4 Exploded View Of Steering Wheel/Airbag
1.
Remove horn button and ring. On 1989-92 models with standard wheel, remove cover attaching screws from underside of wheel then remove the
cover. Disconnect horn wire connectors from contact switch. On models with sport wheel, remove horn contact assembly and flex plate. On Grand
Cherokee models, remove four retaining nuts from back of steering wheel, then remove airbag module.
2.
On all models, remove steering wheel retaining nut, then scribe alignment marks on steering shaft and wheel to aid installation.
3.
Using suitable puller, remove steering wheel from shaft.
4.
Reverse procedure to install. On 1988-92 models, Torque steering wheel retaining nut to 25 ft. lbs.
