Cherokee 2WD L4-150 2.5L VIN H TBI (1988)
Fig. 9 Accumulator springs
3.
Disconnect throttle cable from throttle cam, then remove valve body bolts, Fig. 8, and lower valve body. Remove overdrive clutch accumulator
springs, direct clutch accumulator spring and spacer, second brake accumulator spring and spacer, Fig. 9.
Fig. 10 Check ball & spring
4.
Remove valve body and check ball and spring, Fig. 10.
INSTALLATION
1.
Connect cable to throttle cam, then install check ball and spring, Fig. 10.
Fig. 11 Shift sector & manual valve
2.
Position accumulator springs and spacers on valve body, then align valve body manual valve with shift sector and carefully position valve body on
case, Fig. 11.
