Cherokee 2WD L4-150 2.5L VIN H TBI (1988)
FIGURE 2
6.
Remove the stamped nuts retaining the brake rotor to the hub assembly.
7.
Remove the brake rotor.
8.
Remove cotter pin, retaining nut, axle nut and washer from the outer axle shaft.
9.
Remove the three hub-bearing assembly mounting bolts. Fig. 2
10.
Use a brass hammer to tap hub bearing assembly (9) from steering knuckle.
11.
Remove dust shield (10).
FIGURE 3
12.
Place drain pans under steering knuckle and vacuum shift motor.
13.
Remove right front axle shaft from axle tube.
14.
Remove vacuum motor housing assembly (11) from axle tube.
15.
Remove shift collar (12). Fig. 3
