Cherokee 2WD L4-150 2.5L VIN H TBI (1988)
5. Position the replacement seal on axle shaft seal primary installation tool. Ensure that the seal lip has sufficient clearance from the edge of the tool.
6. Thread the axle shaft seal primary installation tool (with the replacement seal) onto the threaded rod tool via the shift motor housing opening in the
axle shaft-tube. Ensure that the seal primary installation tool is tightly threaded onto the threaded rod tool.
7. Position an open-end wrench on the "flat" area at the outer end of the threaded rod tool to prevent it from turning and tighten the nut (at the outer
end of the threaded rod tool) against the support guide tool to force the replacement axle shaft seal into the axle shaft tube bore. The axle shaft seal
primary installation tool will only force the replacement seal partially into the axle shaft tube bore. The axle shaft seal secondary installation tool
must be used to completely "seat" the replacement seal in the axle shaft tube bore.
