Cherokee 2WD Transmission and Drivetrain Seals: Service Bulletins
8. Loosen the threaded rod tool nut.
9. Insert a drift punch into the hole in the edge of the axle shaft seal primary installation tool. While retaining the punch to prevent the installation
tool from turning, unthread the threaded rod tool from the axle shaft seal primary installation tool.
10. Remove the seal primary installation tool via the shift motor housing opening in the axle shaft tube.
11. Thread axle shaft seal secondary installation tool onto the threaded rod tool via the shift motor housing opening in the axle shaft tube. Ensure that
the seal installation tool is tightly threaded onto the threaded rod tool.