jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Trunk/Liftgate Sensor/Switch (For Alarm) > < Door Sensor/Switch (For Alarm)|Service and Repair|Page 3400

Cherokee 2WD L4-150 2.5L VIN P MFI (1991)

Page 1
background image

Hood Sensor/Switch (For Alarm): Service and Repair

Hood Switch

1. Disconnect battery negative cable.
2. Remove 2 sheet metal screws securing switch and bracket to right inner fender.
3. Disconnect wire from switch.
4. Remove switch and bracket.
5. For Installation, reverse Removal procedure.

Trunk/Liftgate Sensor/Switch (For Alarm) > < Door Sensor/Switch (For Alarm)|Service and Repair|Page 3400