Cherokee 2WD L4-150 2.5L VIN P MFI (1991)
Fig.28 Pump Presure And Supply Line Connections
7. Slowly loosen pump pressure line at pump and allow any residual fluid pressure to bleed off. Then disconnect line from pump.
8. Position drain container under pump return line. Then loosen return line hose clamp and remove line from pump. Discard fluid that drains from
line.
9. Remove pump/motor and bracket as assembly.
10. Remove screw attaching relay to mounting bracket.
11. Remove screws attaching pump/motor assembly to bracket and separate components.
INSTALLATION
1. Position pump/motor assembly on bracket and install assembly attaching screws.
2. Attach pump/motor assembly to mounting bracket.
