Cherokee 2WD L4-150 2.5L VIN P MFI (1991)
Master Cylinder Bolts
INSTALLATION
1. Attach the master cylinder to the power booster. Install the attaching nuts (2). Tighten the nuts to the specified torque, 13-25 Nm (115-220 in. lbs.)
.
2. Connect the brake pipe fittings to the master cylinder.Tighten the lines to the specified torque, 20 Nm (180 in. lbs.).
3. Fill the master cylinder reservoirs to within 6.3 mm (1/4 in) of each rim with brake fluid specified as DOT 3, or J17O3 Motor Automobile
Brake Fluid.
For additional information see Notes, Warnings, and Hints. See: Fundamentals and Basics
