Cherokee 2WD L4-150 2.5L VIN P MFI (1991)
Figure 4
4.
Install the camshaft sprocket retaining bolt and washer and tighten the bolt to 108 N-m (80 ft.lbs.) torque. To verify correct installation of the
timing chain, turn the crankshaft to position the camshaft sprocket timing mark as shown in Figure 4. Count the number of chain pins between
the timing marks of both sprockets. There must be 20 pins.
5.
Turn the chain tensioner lever to the unlocked position, Figure 3.
6.
Install the oil slinger.
7.
Install the timing case cover and gasket.
8.
Install the crankshaft vibration damper and pulley.
9.
Install the accessory drive belt(s).
10.
Install the fan and shroud.
11.
Connect the battery negative cable.
POLICY:
Information only
