jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Recall - Catalyst Failure on Models with 2.5L Engine|Page 1671 > < Recall - Catalyst Failure on Models with 2.5L Engine
Page 2
background image

Converter Packages, Recall PN CHAR68O1 (for 1991 and 1992 model year vehicles), and Recall PN CHBG68O2 for (1993, 1994 and 1995 model year
vehicles) to service 25% of those vehicles.

Each parts package contains these components: 

Owner Notification and Service Scheduling

All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for the service with their dealers. A copy of the owner notification letter is included.

Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer
reference as needed.

Completion Reporting and Reimbursement

Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by Chrysler to record recall service
completions and provide dealer payments.

Use the following labor operation number and time allowance:

Labor Operation

Time

Number

Allowance

Replace Catalytic Converter

11680182

0.7 hours

Add the cost of the recall parts package plus applicable dealer allowance to your claim.

Parts Return

Removed catalytic converters must be returned to the Warranty Material Return Center.

Note

See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing and material return instructions.

Vehicle Not Available

If a vehicle is not available for service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the Owner
Notification Form or describe the reason on a postcard and mail to:

Chrysler Corporation
CIMS 482-00-85
800 Chrysler Drive East
Auburn Hills, Michigan 48326-2757

Following the above procedures will expedite the processing of your claim.

If you have any questions or need assistance in completing this action, please contact your Zone Service Office.

A. Replace Catalytic Converter

WARNING

IF TORCHES ARE USED WHEN WORKING ON THE EXHAUST SYSTEM, DO NOT ALLOW THE FLAME NEAR THE FUEL
LINES.

1.

Raise vehicle on an appropriate hoist.

Recall - Catalyst Failure on Models with 2.5L Engine|Page 1671 > < Recall - Catalyst Failure on Models with 2.5L Engine