jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Front Seat Belt Retractor - Sluggish Operation|Page 3300 > < Front Seat Belt Retractor - Sluggish Operation|Page 3294
Page 1
background image

Seat Belt Retractor: Customer Interest
Front Seat Belt Retractor - Sluggish Operation

NO.: 23-56-91

GROUP: BODY

DATE: May 20, 1991

SUBJECT:

Front Seat Belt Retractor operates sluggish

MODELS:

1991 (XJ) Cherokee (RWD, 4WD) (4Dr. Models Only)

Figure 1

DISCUSSION:

Some of the listed Cherokee 4-door models, may have seat retractors that appear to be sluggish or slow to rewind the seat belt due to the belt support
guide contacting the B-Pillar trim. This condition can be corrected by installing a washer under the belt support/guide anchor bolt (Figure 1).

PARTS REQUIRED:

1

Bolt, Support/Guide Anchor

6034394

1

Washer, Support/Guide

J4007315

REPAIR PROCEDURE:

This repair involves spacing the support/guide, located on the B-Pillar, away from the trim panel.

1.

Remove the cap concealing the support/guide anchor bolt.

2.

Remove the support/guide anchor bolt.

3.

Install the new support/guide anchor bolt (6034394) and washer (J4007315). 
Tighten the bolt to 37 N-m (27 ft.lbs.) torque.

4.

Install the support/guide anchor bolt cap.

Front Seat Belt Retractor - Sluggish Operation|Page 3300 > < Front Seat Belt Retractor - Sluggish Operation|Page 3294