Cherokee 2WD L4-150 2.5L VIN P MFI (1991)
Fig. 35 Lock sector removal
Fig. 40 Disassembling lower end of steering column
16.
Complete disassembly on column shift models, as follows:
a.
Remove gear selector lever upper pivot pin, then selector lever.
b.
Remove upper bearing thrust washer.
c.
Remove lock cylinder housing to steering column jacket attaching screws, then housing.
d.
Remove thrust cap from lock cylinder housing.
e.
Remove ignition switch actuating rod and rack, rack preload spring, shaft lock bolt and spring and shift lever detent plate from lock cylinder
housing.
f.
Using blunt punch, disengage and remove lock sector.
g.
Remove gear selector lever housing and shroud from steering column jacket.
h.
Remove gear selector lever spring from lever housing.
i.
Remove steering shaft.
j.
Remove spring clip from lower bearing retainer, retainer, lower bearing and adapter from steering column.
k.
Remove shift tube.
Fig. 41 Removing lock rack & bolt
17.
Complete disassembly on console shift models, as follows:
