jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Cylinder Head Gasket|Service and Repair > < Crankshaft Main Bearing Seal|Service and Repair
Page 1
background image

Cylinder Head Gasket: Technical Service Bulletins
Engine - Head Gasket Leaks/Seepage

NO.: 
09-11-92

GROUP:
Engine

DATE:
Aug. 24, 1992

SUBJECT:
Head Gasket Leaks/ Seepage - 4.0L Engine

MODELS:
1987-1992

(MJ) Comanche
(XJ) Cherokee 
(YJ) Wrangler

1993

(ZJ) Grand Cherokee

SYMPTOM/CONDITION:

Some vehicles equipped with a 4.0L engine, may experience engine oil leaks/seepage from the head gasket along the right hand side (tappet rail) of the
engine. A new cylinder head gasket is now available. The new gasket has beaded silicone sealer on both sides to eliminate leakage/seepage.

DIAGNOSIS:

Verify the oil leak/seepage is coming from the cylinder head gasket by visual inspection, or using fluorescent tracer dye or by doing a low pressure leak
test.

PARTS REQUIRED:

1

Gasket, Cylinder Head     53020219

REPAIR PROCEDURE:

This repair involves replacement of the cylinder head gasket with a revised gasket.

1.

Remove the cylinder head gasket as outlined in the appropriate service manual.

2.

Install the revised cylinder head gasket as outlined in the appropriate service manual.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No.   09-35-30-91 ...........................................................................................................................................................................  3.4 Hrs.

OPTIONAL EQUIPMENT

Air Conditioning Equipped   09-35-30-61 .................................................................................................................................................................  0.4 Hrs.

FAILURE CODE:
65 - Leaks

Cylinder Head Gasket|Service and Repair > < Crankshaft Main Bearing Seal|Service and Repair