Cherokee 2WD L6-242 4.0L VIN M FI (1987)
7.
Connect the battery negative cable.
SPEEDOMETER CABLE REPLACEMENT
A one-piece speedometer cable is used on models without Cruise Control. The instrument cluster must be removed in order to disconnect the one-piece
cable from the speedometer. Refer to the appropriate instrument cluster removal/installation procedure in this I.S. Note.
A two-piece cable is used on models with Cruise Control. The lower cable can be replaced without having to remove the instrument cluster. However the
cluster must be removed to replace the upper cable. Refer to the appropriate cluster removal/installation procedure in this I.S. Note.
SRC/TIC INFORMATION
OPERATION DESCRIPTION
NUMBER
TIME
TIC
CO. INSTRUMENT CLUSTER, TYPE II -
8791
0.7
see note
R&R (Without Cruise Control)
CO. CABLE, SPEEDOMETER,
8-372
ONE-PIECE-REPLACE Inc.
8793
0.8
8-373
R&R Type II cluster
CO. INSTRUMENT CLUSTER, TYPE II -
R&R (With Cruise Control) Inc. replace
8792
0.5
see note
speedometer upper cable if necessary
CO. CABLE, SPEEDOMETER LOWER -
8035
0.4
8-372
REPLACE
8-373
NOTE:
This operation is used to facilitate another repair. Use the causal part to identify the TIC. Vibration/Noise - 8-372 Broken - 8-373
FILING INSTRUCTIONS
Record this I.S. Note on page C-147 and file it in the M.R. 244 manual.