Cherokee 2WD L6-242 4.0L VIN M FI (1987)
6.
Remove cruise control servo mounting screws (18) and MAP sensor mounting nuts (19). Slide the MAP sensor forward off of the mounting studs
and remove cruise control servo (20) and cable (14) as an assembly.
With one hand, grasp the cruise control cable sheathing (21) and let the servo hang down.
With your other hand, grasp cruise control cable connector (13) and pull the connector and wire cable (14) up.
Release connector (13) and let it slide down wire cable (14). The connector should immediately slide down. It should not stop at any point. Also, wire
cable (14) must not be kinked.
