jeep Workshop Repair Guides

Jeep Cherokee 2WD L6-242 40L VIN M FI Workshop Service and Repair Manual

Engine - Intermittent No Start/Idle Flare|Page 2176 > < Engine - Intermittent No Start/Idle Flare|Page 2174
Page 6
background image

With one hand, grasp the cruise control cable sheathing (21) and let the servo hang down.

With your other hand, grasp cruise control cable connector (13) and pull the connector and wire cable (14) up.

Release connector (13) and let it slide down wire cable (14). The connector should immediately slide down. It should not stop at any point. Also, wire
cable (14) must not be kinked.

Grasp the balled end (22) of wire cable (14) and lift it up. A slight resistance should be felt. Carefully watch the wire cable and release it. It should drop
approximately 1/8" to 1/4".

Engine - Intermittent No Start/Idle Flare|Page 2176 > < Engine - Intermittent No Start/Idle Flare|Page 2174