Cherokee 2WD L6-242 4.0L VIN M FI (1987)
10.
Lower vehicle.
HUB AND BEARING CARRIER INSTALLATION - JEEP MODELS
FIGURE 2 - FRONT WHEEL BEARING ASSEMBLY
1.
Thoroughly clean axle shaft (20) (Fig. 2) and apply a thin coating of lithium grease.
2.
Install rotor shield (16), bearing carrier (10) and hub (6), (Fig. 2).
3.
Apply Locktite, 812 9800, and install the three carrier bolts (17) (Fig. 2). Tighten bolts to 102 N-m (75 ft.lbs.) torque (Fig. 2).